Blades used for the Proxxon FET tilting arbor table saw. They can also be used on the Proxxon FKS/E tilting arbor table saw and the Microlux tilting arbor table saw. The same blades are used on the Preac table saw that is no longer being made. They are 2 1/4” in diameter with a 5/8 inch hole and will work with the standard Preac adapter bushing. To use these blades with the Proxxon or Microlux saw, an adapter bushing that we manufacture is required.
2 1/4” x .028" - 60 tooth standard blade. 2 1/4” x .020" - 132 tooth blade for fine work Adapter bushing for blades on Proxxon FET $8.00
The 60 tooth .028” blade is the standard we supply with the Proxxon FET and was the standard supplied with the Preac. A .032” blade and a .064” blade are also available for cutting 1/32” or 1/16” dados and rabbets. The .020” thick 132 tooth blade is used for veneer and very fine work. All the blades cost $18.00 each.
CLICK BELOW TO LINK TO ANOTHER PAGE IN THIS SITE
Home About Shows/Classes Chairs Tables Cases/Chests Desks Shelves Sewing/Spinning Beds/Cradles
Picture Frames Boxes Kitchen Tools Garden Tools Hearth Tools Woodworking Tools Wind Vanes Firkins/Buckets
Hand Tools Proxxon Table Saw Taig Lathe Mill/Overhead Shaper Preac Blades